Ricoh PJ WX3231N How to set password from Off to On, How to operate when password is On

How to set password (from [Off] to [On])

1Select [Password] in the Default setting 2 menu and press the or button.

2Select [Password setting] and press the or button.

3Select [On].

4Select [OK] and press the button.

The password entry screen is displayed.

5Enter the password using the numeric keys of the remote control.

6The password setting will be set as [On].

How to operate when password is [On]

1Turn on the power.

2The lamp lights and the password entry screen appears.

3Enter the password using the numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is incorrect, a message will appear prompting you to re-enter the password, and the password entry screen is displayed again. If you enter an incorrect password more than 5 times, the projector will automatically power off and enter standby mode.

Note

•When the password setting is [On], the password function will be enabled only when the projector is restarted after the power cord has been unplugged.

The password that you set will not be enabled when restarting from standby mode without unplugging the power cord.

How to set password (from [On] to [Off])

1Select [Password] in the Default setting 2 menu and press the or button.

The password entry screen is displayed.

2Enter the password using the numeric keys of the remote control.

3Select [Password setting] and press the or button.

4Select [OFF].

5Select [OK] and press the button.

Operations

35