Ricoh PJ X3241N, PJ WX3231N owner manual Lamp replacement

Lamp replacement (Continued)

1Unplug power cord.

2Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

3Remove the outer lamp cover.

To remove the outer lamp cover, loosen the screw on the side of the projector, and then slide the cover out and up (as shown in the illustration).

4Remove the inner lamp cover.

To remove the inner lamp cover, fully remove both screws, and then lift the cover (as shown in the illustration). Be careful not to loose the screws.

5Pull out the lamp.

Loosen the 3 lamp locking screws, pull up the handle, and press the tab to remove the lamp.

Outer lamp cover

Inner lamp cover

Tab

6 Mount the new lamp.

Align the orientation, press down the new lamp until the bottom is reached. Then lock it in place using the 3 lamp locking screws.

92