Ricoh PJ X3241N, PJ WX3231N  The default setting menu, Detailed description Auto input search

Using the menus 1 (Continued)

The default setting menu

This menu shows placement status and other settings.

Default setting 1 menu

Item		Description
Auto keystone	Always corrects keystone distortion automatically.			On	Off
No signal	Sets the time to wait for the power to be turned off after the last operation is
power off	made with no input signal.	Off (not turned off)			30 min.
Auto input	Sets whether the input with signals is only selected or not.			On	Off
search
Network input	Sets how to detect the Network input when Auto input search is [On].
detection			Always		Normal
Beep	Beeps when operation is made.			On	Off
Voice guide	Informs the operation status and abnormal conditions.
		Off	Small		Loud

Power on	Sets whether to turn on the power when the ON/STANDBY button is pressed
	(Manual), or when the power cord is plugged in (Auto).
		Manual	Auto
Network standby Switches on/off the network while the projector is in standby. On			Off
Lamp power	Sets the lamp power.	Low	Standard

Detailed description [Auto input search]

[On]: Automatically searches the signals that can be projected, and switches input from the connected device that outputs the video signals each

time the INPUT button is pressed. Input from a connected device that outputs no video signals is skipped.

[Off]: Displays the Input select menu.

Toggle with buttons and press button. (The input without signals can be also selected.)

Note

•In normal operation, set [Auto input search] to [On]. Set to [Off] when you want to select the input source from Input select menu, or if the image does not appear properly.

Input select menu

Input select

Computer 1

Y/PB/PR 1

Computer 2

Y/PB/PR 2

HDMI

Video

S-video

Network

USB memory

/ shows whether signal is input or not.

[Network input detection]

If [Always] is set, even while no images are being sent to the projector through the Network input, the Network input will be selected when the Auto input search is [On].

If [Normal] is set, the Network input is selected only while images are being sent to the projector through the Network input.

Note

•It is recommend that you set the [Network input detection] to [Normal] as long as you do not use the Network input.

•When the projector is in network input mode and [Network input detection] is set to [Always], the projector does not switch to another input signal automatically even if [Auto input search] is set to [On]. Press the INPUT button to switch to another input signal.

42