Ricoh PJ X3241N, PJ WX3231N owner manual Using the menus, Frequency

Using the menus 1 (Continued)

Item		Description	Computer	Y/PB/PR	HDMI	Video	S-video	Network	USB memory
Position	Press	then change mode
	using	and adjust with	Yes	No	No	No	No	No	No
	Phase		Yes	No	No	No	No	No	No
	Adjust to eliminate flicker.
	Frequency
	Adjust to eliminate periodic		Yes	No	No	No	No	No	No
	patterns and flickering when
	many fine vertical lines
	appear on the screen.
	H-position		Yes	No	No	No	No	No	No
	Adjust the horizontal position
	of the image.
	V-position		Yes	No	No	No	No	No	No
	Adjust the vertical position of
	the image.
	Clamp 1		Yes	No	No	No	No	No	No
	Adjusts the clamp pulse
	position.
	Clamp 2		Yes	No	No	No	No	No	No
	Adjusts the clamp pulse
	width.

*1: [Noise reduction] may not work depending on signal type.

*2: [NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for other languages.

*3: [RGB input range] can only be set with RGB signals via an HDMITM cable.

38