Taking pictures/videos
www.kodak.com/go/support 18
Using the camera under water
The camera does not float. To prevent it from sinking, secure it to your wrist with the wrist
strap (provided). You can also purchase a floating wrist strap at
www.kodak.com/go/accessories. Tightly close and latch all doors to keep the camera
waterproof. Do not open doors in water or when hands are wet. Waterproof
integrity may be compromised if the camera is dropped.
For the best focus and color balance under water:
5Press to change to Underwater mode , then press OK.
6Press to choose Underwater Pictures or Underwater Videos, then press OK.
7When finished taking underwater videos/pictures, go back to Step 1 and choose a
non-underwater setting.

After using the camera in water

Wipe off water or debris within 1 hour of submersion in water. If the camera was used in
chemically treated water or saltwater, rinse it in fresh water, then dry with a a soft towel.
If water has entered the camera, remove the card. Allow camera to air-dry for at least 24
hours before using.
Keep doors watertight see page5
IMPORTANT: Camera is waterproof
up to 5 meters (16 ft)
IMPORTANT: Verify that inner and
outer battery doors are tightly closed
before exposing to water.