45 www.kodak.com/go/support
9Troubleshooting
Camera problems
Status Solution
Camera does not
turn on
■Make sure the batteries are installed correctly (see page3 ).
■Make sure batteries are new. If batteries are rechargeable, make
sure they are fully charged (see charger documentation).
Camera does not turn
off
Camera buttons and
controls do not
function
Condensation on the
lens or LCD.
Condensation may occur when the camera is subjected to
temperature or humidity changes. To correct, turn off the camera,
open all doors, and wait until condensation clears.
In Review, a blue or
black screen is
displayed instead of
a picture
■Trans fer
all
pictures to the computer (see page38).
■Take another p icture.
Pictures remaining
number does not
decrease after taking a
picture
■Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire ■Check the flash setting, and change as needed (see page13).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full
■Transfer the pictures to the computer (see page38).
■Delete pictures from the card (see page23) or insert a new card.