Ricoh PJ WX3231N, PJ X3241N owner manual Voice guide, Power on, Network standby, Lamp power

[Voice guide]

Even when you set the [Voice guide] to [Off], it still informs you of the abnormal conditions.

[Power on]

If [Power on] is set to [Auto] and there is a power outage, the projector will come on once power is restored.

[Network standby]

When [Network standby] is set to [On], the network is switched to the standby state as the projector enters standby.While the network is in standby, the projector can be powered on using the remote control function of the Network Utility. When [Network standby] is set to [Off], the projector cannot be powered on with the remote control function of the Network Utility.

[Lamp power]

When [Lamp power] is set to [Low], the screen becomes a little darker, but the cooling fan noise gets quieter.

Default setting 2 menu

Item		Description
Projection	Sets projection mode in accordance with Placement Style. p.21
mode	(Standard)	(Rear)	(Ceiling)	(Rear ceiling)
Fan mode	Sets the cooling fan speed.		Standard	High

Remote control When 2 projectors are used and controlled by the remote control respectively, this menu sets the code for the projector and the remote control.

[ or : Enter setting] [: Select from 1, 2] [: Confirm]

[ :Select OK to end] Press [Cancel] to return.

Key lock	Lock the control panel buttons.
	[ or	: Enter setting] [		: Select On/Off] [ : Confirm]
	[	:Select OK to end]
	Press [Cancel] to return.
Closed Caption Closed Caption settings.
	Press	or	and switch with	and .
				Off/ CC1/ CC2/CC3/CC4/T1/T2/T3/T4
Reset all	Press	. (The password and user logo are not reset.)
	Resets all adjustments and settings to their factory settings. Yes				No
Password	Password setting p.34
	Press	.	Password registration/Password setting

Detailed description [Fan mode]

Setting [Fan mode] to [High] increases the cooling fan speed. (The cooling fan noise increases.) Set this option to use the projector at high altitude (over 1,500 meters above sea level).

• Do not set Fan mode to [High] when using the projector at a lower altitude.

Operations

43