Operating Instructions and Parts List

PW1350

Instrucciones de montaje y lista de piezas

PW1350

System Connection

1.Insert lance into the gun and turn clockwise to positive stop as shown in Figure 4.

Figure 4 - Gun/Lance Connection

2.Be sure that the power switch is in the “OFF” position.

3.Attach the high pressure hose onto the pump water outlet by turning clockwise and hand tightening.

4.Connect garden hose as explained under Garden Hose Connection Instructions.

5.Plug the power cord into a grounded 120V outlet.

6.Turn water on.

7.Unlock trigger lock by moving lock right to left.

8.Depress and hold the trigger on the gun for one minute to release pressure and remove any air trapped in the sys- tem.

9.Turn the “ON/OFF” switch to the “ON” position.

How to Avoid Damaging Surfaces

Directions for Use

Damage to cleaning surfaces occurs because the impact force of the water exceeds the durability of the surface. You can vary the impact force by controlling the nozzle’s fan pattern, the nozzle’s angle to the cleaning surface, and the nozzle’s distance from the cleaning surface. Never use a narrow high impact stream or a turbo nozzle on a surface that is susceptible to damage. Avoid spraying windows with a narrow high impact stream or turbo nozzle. Doing so may break the window. The surest way to avoid damaging surfaces is to follow these steps:

1.Before triggering the gun, adjust the nozzle to a wide fan pattern.

2.Place the nozzle approximately

4-5 feet away from the cleaning surface. Then hold the nozzle at a 45° angle to the cleaning surface. Trigger the gun.

3.Vary the fan pattern spray angle and the distance to the cleaning surface until optimum cleaning efficiency is achieved without damaging the surface.

Nozzle Cleaning Instructions

A clogged or partially clogged nozzle can cause a significant reduction of water coming out of the nozzle and cause the unit to pulsate while spraying.

To clean out the nozzle:

•Turn off unit.

•Turn off water supply. Relieve any pressure trapped in the hose by squeezing trigger 2-3 times.

DETERGENTES

El uso de detergentes puede reducir radicalmente el tiempo de limpieza y ayudar a eliminar las manchas resistentes. Algunos detergentes han sido diseñados específicamente para usar con lavadoras a presión en tareas de limpieza específicas. Estos detergentes tienen una densidad aproximadamente igual a la del agua. El uso de detergentes más espesos, como jabón para vajilla, obstruirá el sistema de inyección de productos químicos y evitará la aplicación del detergente.

La potencia de limpieza de los detergentes depende de su aplicación a una superficie y el tiempo de espera para que los productos químicos actúen sobre la suciedad y el tizne. Los detergentes funcionan mejor cuando se aplican a baja presión.

La combinación de la acción de los productos químicos y el enjuague de alta presión es muy eficaz. En superficies verticales, aplique el detergente comenzando desde abajo y avanzando hacia arriba. Esto evitará que el detergente se escurra hacia abajo dejando marcas. El enjuague de alta presión también se debe realizar desde abajo hacia arriba. En manchas particularmente resistentes, puede ser necesario usar un cepillo conjuntamente con los detergentes y el enjuague de alta presión.

Operación

1.Durante el funcionamiento, la presión afecta la lanza: téngala firmemente con ambas manos y apunte la boquilla hacia el suelo.

2.Accione jalando el gatillo de la pistola pulverizadora/mango.

3.Ajuste la distancia de la superficie a limpiar, lo cual actúa también sobre la presión de la boquilla.

4.Refiérase al manual del producto para el funcionamiento, la limpieza de la superficie, y cómo evitar daños a las superficies y otros asuntos.

Figura 5 - Ajuste de pulverización

CONCLUSIÓN DEL TRABAJO

1.Presione el interruptor ON/OFF de la lavadora de presión en la posición “OFF”.

2.Desconecte el enchufe del suministro de corriente.

3.Cierre el suministro de agua.

4.Accione el mango pulverizador para aliviar la presión de la máquina.

5.Trabe el gatillo en la posición “OFF”.

www.chpower.com

6

31 Sp

Page 5 Page 7
Page 6
Image 6
Campbell Hausfeld PW1350 specifications How to Avoid Damaging Surfaces, Detergentes, Operación, System Connection
Page 5 Page 7

PW1350 specifications

The Campbell Hausfeld PW1350 is a powerful pressure washer designed to cater to various cleaning needs around your home and garden. With a robust motor and efficient design, it makes tackling stubborn dirt, grime, and mildew simpler and more effective. This electric pressure washer boasts a cleaning power of 1350 PSI, offering ample force to blast away tough stains from a variety of surfaces.

One of the key features of the PW1350 is its lightweight and portable construction. Weighing in at just under 25 pounds, it is easy to maneuver, and the ergonomic handle ensures comfortable use during extended cleaning sessions. Its compact design allows for convenient storage, making it suitable for those with limited space.

The PW1350 includes a 20-foot high-pressure hose that provides extended reach, allowing users to clean hard-to-reach areas without the need to move the machine frequently. Additionally, the machine features a quick-connect nozzle system, which includes four different nozzle tips that allow for versatile cleaning options. The nozzles vary in spray patterns, enabling users to adjust the pressure and flow according to the specific task, whether washing a car, patio, or siding.

In terms of technology, this pressure washer incorporates a powerful 13-amp electric motor that provides consistent power without the noise and maintenance associated with gas models. The electric design also means zero emissions, making it an eco-friendly choice for environmentally conscious consumers.

The PW1350 is equipped with a built-in soap dispenser, allowing users to apply detergent easily for more effective cleaning. This feature is particularly useful for removing tough stains and ensuring a thorough clean on surfaces like decks, driveways, and outdoor furniture.

Moreover, safety is prioritized with an integrated safety lock system that prevents accidental starts. It also includes a thermal relief valve that protects the pump from overheating, enhancing the machine's longevity.

In summary, the Campbell Hausfeld PW1350 pressure washer combines power, efficiency, and convenience into a single compact unit. With its user-friendly features and versatility, it serves as an essential tool for homeowners looking to maintain the cleanliness and appearance of their property with minimal effort.
Top Page Image Contents