![](/images/new-backgrounds/1040540/4054025x1.webp)
|
| Clearing obstructions | ||
|
| |||
|
| Remove larger items from carpet | ||
|
| and floor surfaces before | ||
|
| vacuuming to help prevent | ||
|
| obstructions in the hose, wands | ||
|
| or nozzle connector, and | ||
|
| maintain the | cleaning | |
|
| effectiveness | of your cleaner. | |
|
|
| ||
I | To check for obstructions, first | |||
turn cleaner off and disconnect | ||||
|
| |||
|
| from electrical outlet; then dis- | ||
|
| connect power nozzle plug and | ||
|
| wands from hand grip. Plug | ||
|
| cleaner in, turn on, and check | ||
|
| hose end for suction. Remove any | ||
|
| obstructions. Remove power | ||
|
| nozzle from wands and attach | ||
|
| wands to hose. Check for suction | ||
|
| and remove any obstructions. | ||
|
| Before attaching power nozzle to | ||
|
| wands, check nozzle connector. | ||
|
| Push nozzle connector down to | ||
|
| lowest position. Look into nozzle | ||
|
| connector and remove any | ||
|
| obstructions. |
|
Secondary filter
To clean secondary filter
Disconnect cleaner from elec- trical outlet.
The secondary filter, behind the throw away bag, protects the motor from dirt particles. If filter becomes dirt, lift it out and wash in warm water or replace it with a new one. A dry filter must be put back into cleaner.
Do not operate cleaner without the secondary filter in place.
1 2