Tandberg Data

Troubleshooting

 

 

 

If a write protected, unsupported, or damaged tape cartridge is inserted in order to start the Standalone Diagnostics test, it will be ejected by the drive and the Failure and Activity LEDs will be flashing while the Ready LED is off. The two flashing LEDs can be turned off by clicking the Eject Button.

6.5 Media Management Reporting 1

Media Management (MM) is a feature embedded in the Tandberg LTO HH tape drive’s firmware that monitors the read and write performance of the tape drive and media. Write performance information is written on the media header every time the media is rewound, and before the media is unloaded.

6.5.1 Cleaning is required

If the write performance is below a factory set re-write threshold, the Tandberg LTO HH reports that cleaning is required.

Tandberg LTO HH reports that cleaning is required by setting the Clean LED to steady AMBER, and sending information to the backup application software using the SCSI Tape Alert reporting standard.

Figure 6.1 Backup Exec reporting that the tape drive needs cleaning

TAPE

***TapeAlert*** The following information is for Device[0]:

TAPE

E6918 The tape drive needs cleaning:

1.If the operation has stopped eject the tape and clean the drive.

2.If the operation has not stopped wait for it to finish and clean the drive.

Check user’s manual for cleaning instructions.

Figure 6.2 ARCserve reporting that the tape drive needs cleaning

If the Tandberg LTO HH works normal after cleaning, both media and tape drive are good.

6.5.2 Degraded Media

If the write performance is still below the re-write threshold after cleaning, MM reports via the Clean

Tandberg LTO HH Installation and User Manual

27

Page 31
Image 31
Tandberg Data LTO-2 HH, LTO-3 HH, LTO-1 HH user manual Media Management Reporting, Cleaning is required, Degraded Media

LTO-1 HH, LTO-2 HH, LTO-3 HH specifications

Tandberg Data has long been recognized as a leading provider of innovative data storage and backup solutions, and their tape drives, specifically the LTO-1, LTO-2, and LTO-3 Half Height (HH) models, represent a significant advancement in data storage technology. These systems are designed to meet the demands of modern data management, balancing capacity, speed, and reliability.

The LTO-1 HH, introduced in 2001, marked a groundbreaking step in the linear tape-open (LTO) technology. It offered a native storage capacity of 100 GB and a compressed capacity of up to 200 GB. The tape drive featured a data transfer rate of 20 MB/s, allowing for efficient backup processes. One of the key technologies in the LTO-1 was its use of ultral Linear Tapes, which helped in maintaining the integrity of data over extended periods. The built-in data compression capabilities also contributed to the efficient storage of large volumes of data, making it suitable for small to medium-sized businesses.

Building on the success of the LTO-1, the LTO-2 HH was launched, significantly enhancing performance with a native capacity of 200 GB and a compressed capacity of up to 400 GB. The data transfer rate improved as well, reaching 40 MB/s. The LTO-2 introduced the concept of WORM (Write Once, Read Many) technology, which added a layer of security by ensuring that data could not be tampered with after being written. This was particularly important for industries requiring regulatory compliance. Enhanced error correction and data integrity features were also hallmarks of the LTO-2, ensuring reliable long-term data storage.

The LTO-3 HH followed suit with even greater advancements, providing a native capacity of 400 GB and a compressed capacity of 800 GB, along with a data transfer rate of up to 80 MB/s. Its improved track layout and data encoding methods further enhanced performance and reliability. Additionally, LTO-3 introduced the partitioning feature, which divided the tape into virtual partitions for more efficient data management, allowing users to access data faster. The data encryption capabilities introduced with LTO-3 provided enhanced security, protecting sensitive data during backup and storage.

Together, these Tandberg Data LTO tape drives showcase a remarkable evolution in data storage technology, offering robust solutions that cater to businesses of all sizes. Their reliability, security features, and substantial data capacities ensure that organizations can efficiently manage their growing data storage needs in an increasingly digital world.