Tandberg Data LTO-3 HH, LTO-2 HH Software Installation, Windows 2000/2003/XP, Windows Tape Driver

5 Software Installation

This chapter contains information for installing tape drives in the following operating system environments:

•Windows 2000/2003/XP

•SCO Open Server

•SCO UnixWare

•Sun Solaris

•IBM AIX

•HP UX

•Linux

Please see www.tandbergdata.com SUPPORT, [Product], Compatibility for the most current backup application software compatibility information.

5.1 Windows 2000/2003/XP

5.1.1 Windows Tape Driver

The Tandberg LTO HH requires an additional tape driver that is available from the Tandberg website at www.tandbergdata.com.

5.1.2 Windows Tape Driver Installation

1.Right-click on My Computer.

2.Select Manage, you should see the tape drive under “Other devices” with a “?”.

3.Select the device, right click and Properties.

4.Select the appropriate driver location.

5.Follow the instructions on the screen.

5.1.3 Windows Embedded Backup Application

The Backup application is included in the Windows Operating System.

Before running the application, make sure the tape driver for your Tandberg LTO HH tape drive is properly installed. See Section 5.1.2.

To start the application:

1.Click on START.

2.Click on Programs.

3.Click on Accessories.

4.Click on System tools.

5.Select Backup.

Tandberg LTO HH Installation and User Manual 17