Tandberg Data

Troubleshooting

 

 

 

2.Check that the Tandberg LTO HH is mounted correctly.

If the Tandberg LTO HH is mounted incorrectly, it can produce noise when the tape moves.

6.6.6 Cartridge is Stuck Inside the Drive

1.Try to eject the cartridge by pushing the eject button

2.Do a drive reset using the Service mode.

Service mode is entered by keeping the eject button pressed for at least six seconds. The Activity LED starts flashing.

3.To reset the drive, push the eject button once more to make the Activity LED flash. While this LED is flashing, double-click the eject button. This should make the drive do a reset.

4.If the button is not pushed for 15 seconds, the eject button reverts back to its original cartridge eject function.

5.Power cycle the drive (switch power on/off, if possible).

6.6.7 Fault LED Flashes Amber and the Activity LED is Off

The tape drive reports that it has a failure.

1.Do a Drive reset using the Service mode.

Service mode is entered by keeping the eject button pressed for at least six seconds. The Ready LED will start flashing.

To reset the drive, push the eject button once more to make the Activity LED flash. While this LED is flashing, double-click the eject button. This should make the drive do a reset.

If the button is not pushed for 15 seconds, the eject button reverts back to its original cartridge eject function.

2.Power cycle the drive (switch power on/off, if possible).

6.6.8Fault LED Is Flashing Amber and the Activity LED Is Flashing

The drive signals Media Error.

To eject the cartridge, press the Eject button

1.Check if the media is correct.

2.Check the write protection switch position.

3.Check if the media is damaged (see also Section 6.6.4).

4.Check if an expired cleaning cartridge was used (Clean LED is On)

30

Tandberg LTO HH Installation and User Manual

Page 34
Image 34
Tandberg Data LTO-2 HH, LTO-3 HH Cartridge is Stuck Inside the Drive, Fault LED Flashes Amber and the Activity LED is Off

LTO-1 HH, LTO-2 HH, LTO-3 HH specifications

Tandberg Data has long been recognized as a leading provider of innovative data storage and backup solutions, and their tape drives, specifically the LTO-1, LTO-2, and LTO-3 Half Height (HH) models, represent a significant advancement in data storage technology. These systems are designed to meet the demands of modern data management, balancing capacity, speed, and reliability.

The LTO-1 HH, introduced in 2001, marked a groundbreaking step in the linear tape-open (LTO) technology. It offered a native storage capacity of 100 GB and a compressed capacity of up to 200 GB. The tape drive featured a data transfer rate of 20 MB/s, allowing for efficient backup processes. One of the key technologies in the LTO-1 was its use of ultral Linear Tapes, which helped in maintaining the integrity of data over extended periods. The built-in data compression capabilities also contributed to the efficient storage of large volumes of data, making it suitable for small to medium-sized businesses.

Building on the success of the LTO-1, the LTO-2 HH was launched, significantly enhancing performance with a native capacity of 200 GB and a compressed capacity of up to 400 GB. The data transfer rate improved as well, reaching 40 MB/s. The LTO-2 introduced the concept of WORM (Write Once, Read Many) technology, which added a layer of security by ensuring that data could not be tampered with after being written. This was particularly important for industries requiring regulatory compliance. Enhanced error correction and data integrity features were also hallmarks of the LTO-2, ensuring reliable long-term data storage.

The LTO-3 HH followed suit with even greater advancements, providing a native capacity of 400 GB and a compressed capacity of 800 GB, along with a data transfer rate of up to 80 MB/s. Its improved track layout and data encoding methods further enhanced performance and reliability. Additionally, LTO-3 introduced the partitioning feature, which divided the tape into virtual partitions for more efficient data management, allowing users to access data faster. The data encryption capabilities introduced with LTO-3 provided enhanced security, protecting sensitive data during backup and storage.

Together, these Tandberg Data LTO tape drives showcase a remarkable evolution in data storage technology, offering robust solutions that cater to businesses of all sizes. Their reliability, security features, and substantial data capacities ensure that organizations can efficiently manage their growing data storage needs in an increasingly digital world.