Tandberg Data LTO-1 HH, LTO-3 HH 5.6 HP/UX, Tape Drive Installation, 5.6.2 HP/UX System Command

Tandberg Data Software Installation

2.Double-click on Storage Manager.

The list of available tape device(s) appears on the screen.

3.Follow the instructions on the screen to continue

Note:

For any questions related to this application or its installation, please refer to the IBM online documentation

.

5.6 HP/UX

5.6.1 Tape Drive Installation

To install the Tandberg LTO HH tape drives, use the SAM utility.

1.Login as root.

2.Run SAM.

3.Select Peripheral Devices.

4.Select Action/Add.

The Tandberg LTO HH is automatically detected and the necessary drivers installed.

5.6.2 HP/UX System Command

TAR, CPIO and DD allow simple Backup, Verify or Restore operations to be performed. Two different device drivers can be used:

•A Non Rewind device driver (used to perform append backup)

•A Rewind device driver (used only to perform overwrite backup)

Tar command examples:

tar cvf /dev/rmt0 /etc performs the backup of the /etc directory tar tvf /dev/rmt0 reads the data on the tape

tar xvf /dev/rmt0 restores the data from the tape to the current directory tree

For a complete explanation on how to use the system commands, please refer to the HPUX documentation, or the online help. (MAN command).

22 Tandberg LTO HH Installation and User Manual