Tandberg Data LTO-1 HH Glossary of Terms, Tandberg Data, Scam, Scsi-Id, Sldc, Ultra/Ultra2

Tandberg Data	Glossary of Terms
SCAM	SCSI Configured AutoMagically. A SCSI protocol that assigns automatically
	SCSI-IDs to SCAM capable devices such as the Tandberg LTO HH tape
	drives when you boot the system.
SCSI	Small Computer Signaling Interface. The Tandberg LTO HH utilizes the
	SCSI Ultra320 interface which allows for a transfer rate of up to 320 MB/s on
	the bus.
SCSI-ID	A unique identifier assigned to SCSI devices that enables them to
	communicate with a computer when they are attached to a host adapter
	via the SCSI-bus. Each SCSI host adapter board has eight available SCSI-
	IDs with numbers 0 through 7 (or 0 through 15 for Wide SCSI
	adapters). Usually the host adapter itself is assigned SCSI-ID 7.
SLDC™	Streaming Lossless Data Compression. The hardware data compression
	method specified as the standard for the two Ultrum tape formats and
	thus used with the Tandberg 200LTO, LTO-2 HH tape drives.
Ultra/Ultra2	16-bit WIDE SCSI/LVD interface used with SLR7, 24, 40, 50, 60,
	75, 100 and 140 tape drives.

34 Tandberg LTO HH Installation and User Manual