The belt
The belt in your power nozzle drives the agitator. It has been designed specifically for use in this cleaner and is important for effective operation. There are other belts manufactured that are similar in shape and size but are not designed for the HOOVER power nozzle. Such belts do not operate the agitator correctly and may create stress which could damage your power nozzle. Use only a genuine HOOVER Belt No.
When to replace the belt
The belt, located under the nozzle cover, should be checked from time to time to be sure it is in good condition. Remove nozzle cover as shown below. Replace belt if it is stretched, cut, or broken.
How to replace the belt
Disconnect cleaner from elec- trical outlet and disconnect power nozzle from extension wands.
Turn nozzle over and unscrew the 2 Phillips head screws from the nozzle base.
Return nozzle to original position and lift up back of nozzle cover. Rotate cover forward and lift it off the nozzle.
To remove the agitator, position hand underneath nozzle base at agitator opening and push up belt end of agitator. Remove agitator and old belt.
13
