Pressure Washer

Pre-Operation

Unpacking

Remove the equipment and all parts from the carton.. The carton should contain the following:

One pressure washer (pump, engine, cart base)

One cart handle assembly

One spray gun

One lance

One tip holder with 2 spray tips. Additional tips available for purchase, see Page 13

One high pressure hose

One pack of nuts, bolts, and manuals

If any parts are missing, DO NOT RETURN THE UNIT TO THE RETAILER. Know the unit’s model number (located on the serial number tag on the pressure washer frame) and call 1-800-330-0712 for replacement parts..

After unpacking the product, inspect it carefully for any damage that may have occurred during transit.. Make sure to tighten fittings and bolts before using the pressure washer..

do not operate the unit if it’s damaged during shipping, handling,

or use. Damage could result in bursting and cause injury or property damage.

Assembly

1..Slide the handle assembly over the lower legs of the cart base.. Use the supplied nuts and bolts to secure the handle to the legs.. See Figure 1..

Figure 1 – Assemble Handle

2.Brass Swivel Adaptor (See Figure 2).. If it’s not already attached to the pump inlet, assemble the brass swivel adapter and attach it to the pump inlet (See Figure 3 and Figure 4).. Be sure to connect the correct side of the brass swivel adapter to the pump..

Connect This

End To GardenWasher

Hose

Brass

Thermal

Chemical Injector

Swivel

Relief

Hose Barb

Adapter

Valve

 

 

 

 

 

 

High

Garden

Pump

Pump

Pressure

Outlet

Hose

Hose

Inlet

 

 

Figure 2 - Pump hook up

Washer With

Connect This

Filter Screen

End To Pump

Figure 3 - Brass swivel adapter

Brass Swivel

Adapter

Pump Inlet

Figure 4 - Connect the brass swivel to the pump

5

www.chpower.com