Pressure Washer
Pre-Operation
Unpacking
Remove the equipment and all parts from the carton.. The carton should contain the following:
•One pressure washer (pump, engine, cart base)
•One cart handle assembly
•One spray gun
•One lance
•One tip holder with 2 spray tips. Additional tips available for purchase, see Page 13
•One high pressure hose
•One pack of nuts, bolts, and manuals
If any parts are missing, DO NOT RETURN THE UNIT TO THE RETAILER. Know the unit’s model number (located on the serial number tag on the pressure washer frame) and call
After unpacking the product, inspect it carefully for any damage that may have occurred during transit.. Make sure to tighten fittings and bolts before using the pressure washer..
do not operate the unit if it’s damaged during shipping, handling,
or use. Damage could result in bursting and cause injury or property damage.
Assembly
1..Slide the handle assembly over the lower legs of the cart base.. Use the supplied nuts and bolts to secure the handle to the legs.. See Figure 1..
Figure 1 – Assemble Handle
2.Brass Swivel Adaptor (See Figure 2).. If it’s not already attached to the pump inlet, assemble the brass swivel adapter and attach it to the pump inlet (See Figure 3 and Figure 4).. Be sure to connect the correct side of the brass swivel adapter to the pump..
Connect This
End To GardenWasher
Hose
Brass | Thermal | Chemical Injector | |
Swivel | |||
Relief | Hose Barb | ||
Adapter | |||
Valve |
| ||
|
|
|
|
| High | |
Garden | Pump | Pump | Pressure | |
Outlet | Hose | |||
Hose | Inlet | |||
|
|
Figure 2 - Pump hook up
Washer With | Connect This |
Filter Screen | End To Pump |
Figure 3 - Brass swivel adapter
Brass Swivel
Adapter
Pump Inlet
Figure 4 - Connect the brass swivel to the pump
5 | www.chpower.com |
|
