Pressure Washer
3.Secure garden hose (not included) to the inlet connection on pump..
4.Connect the high pressure hose to the pump outlet (See Figures 2 and 5)..
7..Install quick connect tips to tip holder and secure to the pressure washer handle.. See Figure 8..
Figure 5 – Connect high pressure hose to pump
5. Attach the lance to the gun (see Figure 6)..
Figure 6 – Attach lance to gun
6..Install quick connect tip by pulling back on collar and pressing in tip.. Release collar, make sure it completely returns to its forward position and tip is secure (see Figure 7)..
Figure 8 – Insert spray tips into the rubber tip holder
Trigger safety latch
In the engaged position, the trigger safety latch prevents the gun from being triggered accidentally.. Push the latch fully up to engage it (See Figure 9)..
Always engage the trigger safety latch when the unit is not in use..
Engaged
Pull collar back
Figure 9a - Trigger locked
Disengaged
Figure 9b - Trigger unlocked
Figure 7 – Installing quick connect tip
www.chpower.com | 6 |
|
