Operating Instructions

 

SB660000

Important Safety Instructions

Never use

Always assume the

(Continued)

gasoline

tool contains

or other flammable liquids

fasteners. Respect the tool as a working

Tool Use and Care

to clean the tool. Never use

implement; no horseplay. Always keep

a.

Use clamps or another practical way

the tool in the presence of

others at a safe distance from the work

 

to secure and support the workpiece

flammable liquids or gases. Vapors

area in case of accidental discharge of

 

could ignite by a spark and cause an

fasteners. Do not point the tool toward

 

to a stable platform. Holding the

 

yourself or anyone whether it contains

 

explosion which will result in death or

 

work by hand or against the body is

fasteners or not. Accidental triggering

 

serious personal injury.

 

unstable and is able to lead to loss

Do

of the tool could result in death or

 

serious personal injury.

 

of control.

 

not

Do

b. Do not force the tool. Use the

remove, tamper with,

not

or otherwise cause the

 

correct tool for the application. The

drive a fastener on top

 

trigger lock or trigger

 

correct tool will do the job better

of other fasteners. The

 

to become inoperable.

 

and safer at the rate for which the

fastener could glance

 

Do not operate any

 

and cause death or a

 

tool is designed.

tool which has been modified in a like

 

serious puncture wound.

c.

Do not use the tool if the switch

fashion. Death or serious personal

 

injury could result.

! WARNING

 

does not turn the tool on or off. Any

 

 

 

Do

Do not operate or allow

 

tool that cannot be controlled with

 

not

anyone else to operate

 

the switch is dangerous and must be

 

touch the trigger unless

the tool if any warnings

 

repaired.

 

driving fasteners. Never

or warning labels are not legible.

d.

Disconnect the

attach air line to tool or

Warnings or warning labels are located

carry tool while touching the trigger.

on the tool magazine and body.

 

tool from the air

 

The tool could eject a fastener which

Do not drop or

 

source before making adjustments,

 

will result in death or serious personal

 

doing tool maintenance, clearing

throw the tool.

 

injury. Also actuate the trigger lock to

 

jams, leaving work area,loading,

Dropping or throwing the tool can

 

the safe position when not in use.

 

or unloading the tool. Such

result in damage that will make the tool

 

 

 

precautionary measures reduce the

 

unusable or unsafe. If the tool has been

 

risk of injury to persons.

 

dropped or thrown, examine the tool

 

Always disconnect the

closely for bent, cracked or broken parts

e.

Store the tool when it is idle out

and air leaks. STOP and repair before

tool from the power

 

of reach of children and other

using or serious injury could occur.

 

source when unattended, performing

 

untrained persons. A tool is

any maintenance or repair, clearing

Avoid using the

 

dangerous in the hands of untrained

a jam, or moving the tool to a new

tool when the

 

users.

location. Do not load the tool with

magazine is empty. Accelerated wear on

 

fasteners when the trigger is depressed.

the tool may occur.

 

 

f.

Maintain the tool with care. Keep

The tool could eject a fastener causing

Clean and check all

 

a cutting tool sharp and clean. A

death or serious personal injury.

 

air supply hoses

 

 

 

properly maintained tool, with sharp

 

and fittings before connecting the

 

cutting edges reduces the risk of

Always fit tool with a

tool to an air supply. Replace any

 

binding and is easier to control.

damaged or worn hoses or fittings.

 

fitting or hose coupling

 

Tool performance or durability may be

 

 

g.

Check for misalignment or binding

on or near the tool in

reduced.

 

of moving parts, breakage of parts,

such a manner that all

 

 

compressed air in the tool is discharged

Service

 

and any other condition that affects

 

at the time the fitting or hose coupling

 

a. Tool service must be performed only

 

the tool’s operation. If damaged,

is disconnected. Do not use a check

 

have the tool serviced before using.

valve or any other fitting which allows

by qualified repair personnel.

 

Many accidents are caused by poorly

air to remain in the tool. Death or

b. When servicing a tool, use only

 

serious personal injury could occur.

 

maintained tools. There is a risk of

Never

identical replacement parts. Use

 

bursting if the tool is damaged.

only authorized parts.

 

place

 

 

 

h.

Use only those fasteners listed

hands or any other body

c. Use only the lubricants supplied

 

in the Accessories section of this

parts in the fastener

with the tool or specified by the

 

discharge area of the tool.

 

manual. Fasteners not identified

manufacturer.

 

The tool might eject a fastener and

 

for use with this tool by the tool

could result in death or serious personal

Do not make any

 

manufacturer are able to result in

injury.

modifications to

 

a risk of injury to persons or tool

Never

the tool without first obtaining written

 

damage when used in this tool.

carry

approval from Campbell Hausfeld. Do

i.

Select an appropriate tool actuation

the tool by the air hose

not use the tool if any shields or guards

or pull the hose to move

are removed or altered. Do not use the

 

system, taking into consideration the

the tool or a compressor.

tool as a hammer. Personal injury or

 

work application for which the tool

Keep hoses away from

tool damage may occur.

 

is used.

heat, oil and sharp

 

 

edges. Replace any hose

 

 

 

 

 

 

that is damaged, weak or

 

 

 

worn. Personal injury or

 

 

 

tool damage could occur.

 

 

 

3

www.chpower.com