
See Warranty on page 4 for important information about commercial use of this product.
Operatingti Instructionsstr cti s & Parts Manual | XXXXX, XXXXX and XXXXX |
|
|
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
Air Operated
Grease Gun
Table of Contents |
|
Description . . . . . . . . . . . . . . . . . . . . | . .1 |
Unpacking . . . . . . . . . . . . . . . . . . . . . | . .1 |
Safety Guidelines . . . . . . . . . . . . . . . | . .1 |
General Safety Information . . . . . . . | . .1 |
Assembly . . . . . . . . . . . . . . . . . . . . . . | . .2 |
. .2 | |
Operation . . . . . . . . . . . . . . . . . . . . . | |
Troubleshooting Chart .. .. .. .. .. .. .. .. .. .. .. | .. ..3 |
Warranty . . . . . . . . . . . . . . . . . . . . . . | . .4 |
Description
Air operated grease guns are air tools designed for lubricating automobiles, recreational vehicles, machinery and farm equipment..
Gun Head | Slotted | |
Screws | ||
| ||
| Exhaust | |
| Port Hole | |
Air Vent | Trigger | |
| ||
Bulk Fill Valve |
| |
Container | 1/4 inch Female | |
NPT Air Inlet | ||
Tube |
| |
Grease | Plunger Release | |
Fitting | Plunger Handle | |
Adaptor | ||
|
Unpacking
When unpacking this product, carefully inspect for any damage that may have occurred during transit.. Check to be sure all supplied accessories are enclosed with the unit..
Safety Guidelines
NOTE: Information that requires special attention..
2.Only persons well acquainted with these rules of safe operation should be allowed to use the air tool..
Do not exceed the maximum operatingpressure of the air tool (90 psi). This can reduce the life of the tool.3.Do not exceed any pressure rating of any component in the system..
This manual contains information that is very important to know and understand.. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS.. To help recognize this information, observe the following symbols..
General Safety Information
California proposition 65This product orits power cord maycontain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Wash hands after handling.4.Disconnect air tool from air supply before changing tools or attachments, servicing and during
hazardous situation which, if not avoided, WILL result in death or serious injury.
Warning indicates a potentiallyhazardous situation which, if not avoided, COULD result in death or serious injury.
Caution indicates a potentiallyhazardous situation which, if notThis product is part of a high pressure system and the following safety precautions must be followed at all times along with any other existing safety rules..
1.. Read all manuals included
with this product carefully..
MANUAL
Be thoroughly familiar with the controls and the proper use of the equipment..
5.Do not wear loose fitting clothing, scarves, neck ties or jewelry when operating any tool.. Loose clothing or jewelry may become caught in moving parts and result in serious personal injury..
6.Do not depress trigger when connecting the air supply hose..
7.Always use attachments designed for use with air powered tools.. Do not use damaged or worn attachments..
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2010 Campbell Hausfeld/Scott Fetzer | For parts, product & service information | IN230402AV 8/10 |
| visit www.chpower.com |
|