|
|
|
| Fig. 2 | |
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
| ||
|
|
|
|
| |
Technical data |
| ||||
|
|
|
|
| |
■ Max. load of dry laundry | 4,5 kg | ||||
■ Water pressure | 0,05 ÷ 0,8 MPa | ||||
■ Spin speed | |||||
1400 rpm | |||||
Measurements |
| ||||
■ Width | 60 cm | ||||
■ Depth | |||||
52 cm | |||||
■ Height | |||||
85 cm | |||||
|
|
|
| ||
|
|
|
|
| |
NB: For specifications regarding electrical data, see the data panel on the front of the washing machine (porthole area) - as shown in diagram above.
EC Appliance complies with European Directive 89/336/EEC, 73/23/EEC and subsequent amendments.
SETTING UP + INSTALLATION
1 | Remove the polystyrene base and place the machine near | ||
its permanent position | (diagram 1). | ||
| |||
| Carefully cut through the hose retaining clip at the rear of | ||
| the appliance (diagram 2). | ||
| Unscrew the central bolt (A); unscrew the 4 lateral screws | ||
| (B) and remove the cross piece (C) (diagram 3). | ||
2 | Lean the machine forward and remove the plastic bags | ||
containing the two polystyrene blocks at the sides, pulling | |||
| downwards (diagram 4). | ||
| Press the plug (to be found in the envelope with the | ||
| instructions) into the hole and rotate to lock into position | ||
| (diagram 5). |
| |
3 | 4 | 5 | |
WARNING:
DO NOT LEAVE THE PACKAGING WITHIN REACH OF CHILDREN AS IT IS A POTENTIAL SOURCE OF DANGER.
Apply the insulation sheet of corrugated material to the base as shown.
Level the machine by means of the front feet. |
|
a) Turn the nut clockwise to release the screw adjuster on the foot. | A |
b) Rotate the foot to raise or lower it until it stands |
|
firmly on the ground. | B |
c) Lock the foot in position by turning the nut | |
|
C
24 | 25 |