Cannon 10526G, 10525G Care And Cleaning, Oven Heat Clean Linings, Replacement Of Oven Light Bulb

Models: 10520G 10525G 10526G

1 24
Download 24 pages 18.87 Kb
Page 15
Image 15
CARE AND CLEANING

CARE AND CLEANING

Clean the cooker regularly and wipe up spills soon after they occur to prevent them from becoming burnt on. Never use biological washing powder, caustic cleaners, harsh abrasives, scouring pads, steam cleaners, aerosol cleaners or oven chemical cleaners of any kind.

To move the cooker forward, open the door and with both hands positioned under the roof of the compartment, lift and pull forward. Replace by pushing the cooker backwards. Check that the cooker is level. Take care to ensure that any floor covering is not damaged.

OVEN HEAT CLEAN LININGS

The oven roof and side linings are coated with a special enamel which has a continuous cleaning action. The higher the oven temperature the more effective the action. In most cases this cleaning operation will proceed during normal cooking. However, if roasting is done frequently, or high temperatures are not used regularly, it may be necessary to run the oven empty at Mark 8 for about two hours.

If desirable, they can be wiped with a cloth wrung out in hot soapy water followed by a clean damp cloth.

REPLACEMENT OF OVEN LIGHT BULB

CAUTION: DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY BEFORE REPLACING THE LAMP TO AVOID THE POSSIBILITY OF AN ELECTRIC SHOCK

Light bulbs are not covered by the manufacturer’s guarantee.

A new 15W, 300oC rated SES bulb can be obtained from your cooker supplier or any major electrical retailer.

1.Remove the shelves from the oven.

2.Unscrew the lens using a thick cloth to protect your fingers in the unlikely event of a lens fracture.

3.Unscrew bulb.

4.Fit new bulb and refit lens.

15

Page 15
Image 15
Cannon 10526G, 10525G, 10520G Care And Cleaning, Oven Heat Clean Linings, Replacement Of Oven Light Bulb