Color Display Mode
You can select the color display mode which will be the basis for color adjustment from three options (HSL, Lab or RGB) as well as check values for adjusted colors.
Switches the color display mode
Color value after adjustment
Color value before adjustment
OWhen “HSL” is selected for the color display mode, you can only change the color value for before adjustment by entering a number.
O HSL is a color mode expressed by the three elements of hue (H), saturation (S) and luminosity (L).
You can adjust the brightness and contrast of a specific area using the tone curve.
Adjust the brightness and contrast.Click to add a [ ] (adjustment point) and adjust by dragging
The setting value of the selected point (you can also enter numerical values)
¿The brightness and contrast of the image change.
The horizontal axis shows the input level and the vertical axis shows the output level.
OThe maximum number of [ ] is 10.
OTo delete a [ ], select the [ ] and then either press the <Del> key on the keyboard or
OLab is a color mode developed by the CIE (Commission Internationale d’Eclairage) where L displays lightness, a displays color elements from green to magenta and b displays color elements from blue to yellow.
ORGB is a color mode which expresses red (R), green (G) and blue (B), the three primary colors (additive colors) of the visible light spectrum.
14