GAS CONNECTION
CONNECTING TO THE GAS SUPPLY
The cooker is designed to match the depth of standard 600mm work tops. An adaptor backplate should, therefore, be fitted within the shaded area shown in to allow the cooker to be pushed fully to the wall. If a forward facing backplate elbow is used it must be chased into the wall.
| 75 |
225 | 237 |
510 |
|
190 |
|
| 540 |
CONNECTING TO GAS SUPPLY
Connection to the appliance should be made with an approved appliance
flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor. LPG models should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50mbar.
The temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70°C.
29
