Installation

INSTALLING THE BOOM AND BALL HOOK

1)Remove the ball hook collar, ball hook, and 1/4-20 nut from the included hardware bag assembly.

2)Thread the nut onto the ball hook, then thread the ball hook into the ball hook collar. Do not tighten yet. (Figure 1)

3)Slide ball hook collar onto the end of the boom and leave it loose. (Figure 2)

4)Insert boom with ball hook collar assembly into frame (Figure 3) and line up holes in boom with holes in frame

(Figure 4).

5)Remove 1/4-20 x 2” bolt and 1/4-20 nylon locknut from included hardware bag assembly.

FIGURE 1

FIGURE 2

FIGURE 3

8

FIGURE 4

www.cannondownriggers.com

Page 8
Image 8
Cannon 5 ST, 10 STX TS owner manual Installing the Boom and Ball Hook