Gas connection

The cooker should be connected to the gas-supply by a corgi registered installer. During installation of this product it is essential to fit an approved gas tap to isolate the supply from the appliance for the convenience of any subsequent removal or servicing. Connection of the appliance to the gas mains or liquid gas must be carried out according to the prescribed regulation in force, and only after it is ascertained that it is adaptable to the type of gas to be used. If not, follow the instructions indicated in the paragraph headed “Adaptation to different gas types”. On some models the gas supply can be connected on the left or on the right, as necessary; to change the connection, reverse the position of the hose holder with that of the cap and replace the gasket (supplied with the appliance). In the case of connection to liquid gas, by tank, use pressure regulators that conform to the regulation in force. The gas supply must be connected to the left of the appliance. Be sure that the hose does not pass through the rear of the cooker touching hot parts.

HOT PARTS

600 mm

Important: make sure the supply pressure conforms with the values shown in the table entitled “Caracteristics of the burners and nozzles”. When the cooker is installed between cabinets (recessed), the gas connection must be effected by an approved flexible hose with bayonet fitting (BS 669 Current Edition).The gas inlet for the cookers is a threaded G 1/2 gas female fitting.

Connecting the gas supply

To make the connection, a flexible hose should be used corresponding to the current gas regulations which are:

•the hose must never be at any point in its lenght in contact with the “hot” parts of the cooker;

•the hose must never be longer than 1,5 metre;

•the hose must not be subject to any tension or torsional stress and it must not have any excessively narrow curves or bottlenecks;

•the hose must be easy to inspect along its entire length to check its condition;

•the hose must always be in good condition, never attempt to repair.

Important: the installation must comply with gas safety (installation and use) regulations 1984. In all cases for the above, by low, a qualified, corgi approved engineer must be called for installation.

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

Adapting the cooker to different types of gas

In order to adapt the cooker to a different type of gas with respect to the gas for which it was produced (indicated on the label attached to the lid), follow these steps:

a)replace the hose holder mounted on the appliance with that supplied in the bag of “cooker accessories”.

b)Replacing the burner nozzles on the hob:

•remove the grids and slide the burners from their housings;

•unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”).

•replace all the components by repeating the steps in reverse order.

5

Page 4 Page 6
Page 5
Image 5
Cannon C110DPX manual Gas connection
Page 4 Page 6

C110DPX specifications

The Cannon C110DPX is a powerful and versatile digital projector designed for a wide range of applications. Known for its outstanding image quality and advanced features, the C110DPX has become a popular choice for businesses, educational institutions, and event venues.

One of the standout features of the Cannon C110DPX is its exceptional brightness. With a luminous output of up to 10,000 ANSI lumens, this projector can easily deliver clear and vibrant images even in well-lit environments. This makes it ideal for use in conference rooms, classrooms, and large auditoriums. The projector supports a wide range of resolutions, including Full HD and 4K, ensuring that users can enjoy stunning visuals regardless of their content.

The C110DPX employs advanced DLP technology, which contributes to its impressive color reproduction and sharpness. With a high contrast ratio, this projector can produce deep blacks and brilliant whites, allowing for better detail in both bright and dark scenes. This technology ensures that presentations, videos, and images are displayed with remarkable clarity and fidelity.

Portability is another key characteristic of the Cannon C110DPX. Weighing in at a manageable size, it is designed for easy transportation, making it suitable for both fixed and mobile setups. Additionally, the projector features a variety of connectivity options, including HDMI, DisplayPort, and USB, ensuring compatibility with a wide array of devices. This flexibility allows users to connect laptops, tablets, and smartphones with ease.

The C110DPX also incorporates intelligent networking capabilities, allowing for seamless integration into existing IT infrastructures. This connectivity allows for remote management and monitoring, making it easier for IT professionals to maintain and troubleshoot the device without being physically present. With built-in network features, users can control the projector via a web interface or through various control systems.

Furthermore, the Cannon C110DPX emphasizes energy efficiency. It is equipped with features that help reduce power consumption without compromising performance, making it an environmentally friendly choice.

In conclusion, the Cannon C110DPX digital projector stands out for its exceptional brightness, advanced DLP technology, portability, extensive connectivity options, intelligent networking capabilities, and energy efficiency. These features make it an excellent choice for anyone looking to deliver high-quality presentations in a variety of settings. Whether for corporate events, educational purposes, or entertainment, the C110DPX is sure to meet and exceed user expectations.
Top Page Image Contents