Cannon IWDE manual Wash cycles and options, Table of wash cycles, Wash options

Wash cycles and options

Table of wash cycles

cycles		Max.	Max.		Detergents		Max. load (kg)		Cycle
Wash	Description of the wash cycle	temp.	speed	Drying		Fabric		Eco	duration
		(°C)	(rpm)		Wash		Normal
						softener		Time
	Daily
1	White Cotton: extremely soiled whites.	90°	1400				7	-
1	White Cotton (1): heavily soiled whites and resistant colours.	60°	1400				7	-	The
1	White Cotton (2): lightly soiled whites and delicate colours.	40°	1400				7	-
2	Cotton: heavily soiled whites and resistant colours.	60°	1400				7	3,5	duration
3	Coloured Cotton (3): lightly soiled whites and delicate colours.	40°	1400				7	3,5
4	Synthetics: heavily soiled resistant colours.	50°	800				3	2	of
	Special
									the
5	Wool: for wool, cashmere, etc.	40°	600	-			1,5	-
									wash
6	Silk/Curtains: for garments in silk and viscose, lingerie.	30°	0	-			1	-
7	Jeans	40°	800				3	-	cycles
	Sport
8	Sport Intensive	30°	600	-			3	-	can
9	Sport Light	30°	600	-			3	-
10	Special Shoes	30°	600	-			Max. 2	-	be
							pairs		checked
	Dry
11	Cotton	-	-		-	-	5	-	on
12	Synthetics	-	-		-	-	3	-
									the
13	Express Wash&Dry	30°	1400				0,5	-
									display.
	Partial wash cycles
	Rinse	-	1400		-		7	-
	Spin	-	1400		-	-	7	-
	Drain	-	0	-	-	-	7	-

The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.

For all Test Institutes:

1)Test wash cycle in compliance with regulation EN 50229: set wash cycle 1 with a temperature of 60°C.

2)Long wash cycle for cottons: set wash cycle 1 with a temperature of 40°C.

3)Short wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.

GB

Wash options

Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly

soiled cotton and synthetic fabrics (refer to the “Table of

wash cycles”). “” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.

!This function may not be used in conjunction with cycles 1, 5, 6, 7, 8, 9, 10, 11, 12, 13, , , .

Intensive Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a high-performance wash.

!This function may not be used in conjunction with cycles 5, 6, 7, 8, 9, 10, 11, 12, 13, , , .

Easy iron

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of the cycle the Washer-dryer will perform slow ro- tations of the drum; the indicator lights for the EASY IRON

and START/PAUSE options will flash (the first one green, the second orange).

To end the cycle, press the START/PAUSE button or the EASY IRON button.

For the 6 wash cycle, the machine will end the cycle while the laundry is soaking and the EASY IRON and START/ PAUSE indicator lights will flash. To drain the water so that the laundry may be removed, press the START/PAUSE button or the EASY IRON button.

!This function may not be used in conjunction with cycles

5, 8, 9, 10, 11, 12, 13, , .

Note: If you also want to run the drying cycle, this option is enabled only if combined with level “A1” (Iron dry).

Delay Timer

To set a delayed start for the selected cycle, press the corresponding button repeatedly until the required delay period has been reached. When this option is enabled, the corresponding indicator light will remain lit. To remove the delayed start setting, press the button until the text “OFF” appears on the display.

!This option can be used in conjunction with all cycles.

9