Personalisation

Setting the temperature

 

 

 

GB

Turn the TEMPERATURE knob to set the wash temperature (see

Table of wash cycles).

 

The temperature may be lowered, or even set to a cold wash .

 

 

The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value

 

set for each wash cycle.

 

 

Setting the spin speed

 

 

Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.

 

The maximum spin speeds available for each wash cycle are as follows:

 

Wash cycles

Maximum spin speed

 

 

Cottons

1000 rpm

 

 

Synthetics

800 rpm

 

 

Wool

800 rpm

 

 

The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol .

The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed set for each wash cycle.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time. To activate the functions:

1.Press the button corresponding to the desired function;

2.the function is enabled when the corresponding indicator light is illuminated.

Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle.

Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled

cotton and synthetic fabrics (refer to the ““Table of wash cycles”). “” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.

!This function may not be used in conjunction with wash cycles 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, , .

The function saves energy by not heating the water used to wash your laundry - an advantage both to the environment and to your energy bill. Instead, intensified wash action and water optimisation ensure great wash results in the same average time of a standard cycle.

For the best washing results we recommend the usage of a liquid detergent.

!This function may not be used in conjunction with wash cycles 6, 7, 8, 10, 12, 13, 14, , .

Extra Rinse

By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly useful for sensitive skin.

!It cannot be used in conjunction with the 8, programmes.

Delay Timer

This timer delays the start time of the wash cycle by up to 12 hours.

Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the button is pressed, the function will be disabled.

N.B. Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching the set programme.

!This option is enabled with all programmes.

9

Page 9
Image 9
Cannon IWSC manual Personalisation, Functions, Table of wash cycles, Set for each wash cycle