INSTALLATION INSTRUCTIONS

Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment conditions are compatible. The adjustment conditions for this appliance are stated on the data badge which is fitted on the plinth panel.

This appliance is not designed to be connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. Particular attention should be given to the relevant requirements regarding ventilation.

MODEL NUMBERS 10270G Mk2, 10275G Mk2 AND 10278G Mk2 Category I2H (GB, IE)

These models are set to burn NATURAL GAS (G20) at 20 mbar ONLY and cannot be used on any other gas.

MODEL NUMBERS 10271G Mk2 AND 10276G Mk2

Category I3+ (GB, IE)

These models are set to burn PROPANE GAS (G31) at 37 mbar and BUTANE gas (G30) at 28 - 30 mbar and can not be used on any other gas.

GAS SAFETY (INSTALLATION & USE) REGULATIONS

It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the above regulations. It is in your interest and that of safety to ensure compliance with the law.

In the UK, CORGI registered installers work to safe standards of practice. The cooker must also be installed in accordance with BS 6172: 1990.

Failure to install the cooker correctly could invalidate the warranty liability claims and could lead to prosecution.

LOCATION

The cooker may be located in a kitchen, kitchen/diner or a bed-sitting room, but not in a room containing a bath or shower. The cooker must not be installed in a bed-sitting room of less than 20m3.

LPG models must not be installed in a room or internal space below ground level, e.g. in a basement.

PROVISION FOR VENTILATION

The room containing the cooker should have an air supply in accordance with BS 5440:Part 2: 1989.

The room must have an opening window or equivalent; some rooms may also require a permanent vent. If the room has a volume between 5 and 10m3, it will require an air vent of 50 cm2 effective area unless it has a door which opens directly to outside. If the room has a volume of less than 5m3, it will require an air vent of 100 cm2 effective area. If there are other fuel burning appliances in the same room, BS 5440: Part 2: 1989 should be consulted to determine air vent requirements.

19

Page 19
Image 19
Cannon None Installation Instructions, GAS Safety Installation & USE Regulations, Location, Provision for Ventilation

None specifications

Cannon None is an innovative and cutting-edge product in the realm of digital imaging, specifically tailored for professional photographers and video creators. The Cannon None brand has gained recognition for delivering high-quality performance, exceptional image integrity, and user-friendly features. This article highlights the main features, technologies, and characteristics that set Cannon None apart in a competitive market.

One of the most significant features of Cannon None is its advanced imaging sensor, which surpasses traditional sensors in terms of dynamic range and low-light performance. This sensor enables photographers to capture stunning images in a variety of lighting conditions, from bright daylight to dimly lit environments, without compromising quality. The integration of Dual Pixel technology allows for rapid autofocus, ensuring that every shot is perfectly focused, even in fast-paced situations.

Cannon None boasts a robust build quality designed to endure the rigors of professional use. With weather-sealing capabilities, it can perform reliably in various environmental conditions, making it an ideal choice for outdoor shooting. Additionally, the ergonomic design enhances user comfort, facilitating extended shooting sessions without causing fatigue.

Another standout feature of Cannon None is its innovative connectivity options. With built-in Wi-Fi and Bluetooth technologies, users can easily share their images and videos across devices or upload them directly to social media platforms. The camera also supports remote control and shooting through a dedicated mobile app, providing flexibility and convenience for creators on the go.

Cannon None incorporates advanced video capabilities, including 4K recording and high frame rate options, making it a versatile tool for videographers. The inclusion of in-body image stabilization helps to deliver smooth footage, reducing the risk of motion blur and ensuring professional-grade results.

The user interface of Cannon None is designed for intuitiveness, allowing both novice and experienced users to navigate settings effortlessly. Customizable controls and an intuitive touchscreen enhance the user experience, making it easy to adjust parameters in real-time.

In conclusion, Cannon None represents a remarkable fusion of technology and user-centric design. With its superior imaging capabilities, robust construction, advanced connectivity, and intuitive interface, it empowers photographers and videographers to unleash their creative potential and capture their vision with precision and ease. As the digital imaging landscape continues to evolve, Cannon None remains at the forefront, setting new standards for performance and innovation.