Chapter 28: Rebooting the
remain Enabled on both the switch management software and the physical front panel ecoFriendly button.
8.Click Accept.on the message.
The Factory Default Reset page changes and displays the Factory Default Reset feature as Disabled. See Figure 135.
Figure 135. Factory Default Reset Disabled Page
Enabling Factory Default Reset
9.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
If the Factory Default Reset feature is disabled and you choose to Enable it, perform the following procedure:
1.From the main menu on the left side of the page, select the Tools folder.
The Tools folder expands.
2.From the Tools folder, select Reboot.
The Factory Default Reset/Reboot Page is displayed. See Figure 135.
3.Go to the Factory Default Reset section on the upper part of the page. The Factory Default Reset field should be set to Disable.
Note
If the Factory Default Reset field is already set to Enable, you do not need to continue with this procedure.
4.To enable the factory default reset feature, select Enable on the pull- down menu of the Factory Default Reset field.
The Factory Default Reset/Reboot Page changes to include a Password field for entering a password. See Figure 136 on page 345.
344
