AT-GS950/48PS Switch Web Interface User’s Guide

Group Status

To display the LACP Group Status, perform the following procedure:

1.Select the Bridge folder. The Bridge folder expands.

2.From the Bridge folder, select the Trunk Config folder. The Trunk Config folder expands.

3.From the Trunk Config folder, select LACP Group Status. The LACP Group Status Page is displayed. See Figure 32.

Figure 32. LACP Group Status Page

Note

Go to “Create a Port Trunk” on page 99 to directly change the parameters on this page:

111

Page 111
Image 111
Allied Telesis AT-GS950/48PS, AT-S111 manual Group Status