Allied Telesis AT-S111, AT-GS950/48PS manual Policed-CoS fields, Example of In-Profile Action Entry

Chapter 18: Access Control Configuration

Note

The In-Profile Action Index is a required parameter when you create a Policy. See “Create Policy” on page 238 for more information.

4.Enter a number in the Profile Action ID field ranging from 0 to 72. This field is mandatory.

Note

This field must be pre-defined on the Create Profile page - see “Creating a Profile Action” on page 224 for more information.

5.In the Deny/Permit field, use the pull down menu to select one of the following parameters:

Deny - This selection drops ingress packets that conform to the specified Profile Action ID.

Permit - This selection allows ingress packets that conform to the specified Profile Action ID to be processed by the switch.

Note

You must enter a selection for Deny/Permit field even if the Profile

Action ID that you have entered ignores both the Policed-DSCP and

Policed-CoS fields.

6.Click Add.

The In-Profile Action entry is added to the status table. If you do not see you new entry, you may need to navigate to another page of the table with the First Page, Previous Page, Next Page, and Last Page buttons located below the table. An example of an In-Profile Action table entry is displayed in Figure 83.

Figure 83. Example of In-Profile Action Entry

228