Chapter 13: Virtual LANs
Delete a Tagged
VLAN
5.You cannot modify the VLAN ID on this web page. If you want to delete the VLAN ID, go to “Delete a Tagged VLAN” on page 160 for more information.
6.To change the VLAN Name, type a new VLAN Name in the VLAN Name field.
For more information about this field, refer to “VLAN Name” on page 151.
7.To change the Management VLAN assignment, select one of the following choices from the
Enable: This parameter enables Management VLAN on this VLAN. The Management VLAN will be disabled on all other VLANs and only be operational on this VLAN.
Caution
If you Enable the Management VLAN on this VLAN and you are connected to a Tagged Member port, you may loose your connection to the
Disable - This parameter disables Management VLAN on this VLAN. If you change this parameter from Enable to Disable, the Management VLAN will be enabled on the DefaultVLAN automatically.
Note
The Management VLAN is always Enabled on the DefaultVLAN and cannot be disabled.
8.To change the port selections, click on the port numbers labeled either Static Tagged or Static Untagged.
9.Click Apply.
10.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
To delete a tagged VLAN, perform the following procedure:
1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.
2.From the Bridge folder, select VLAN. The VLAN folder expands.
160
