Chapter 21: Security
authentication.
Enabled: The Piggyback Mode is Enabled.
Disabled: The Piggyback Mode is Disabled.
VLAN Assignment - This parameter enables the VLAN assignment that you select with the Guest VLAN ID parameter. Choose from the following:
Enabled: The VLAN Assignment is Enabled.
Disabled: The VLAN Assignment is Disabled.
Secure VLAN: This field is inactive
Guest VLAN ID: This parameter specifies the VLAN ID that is designated as a Guest VLAN. The range is 0 to 4000 where 0 is disabled.
When a supplicant account is created on the RADIUS server, a VLAN identifier must be entered along with a username and password combination or MAC address information. If the switch receives a valid VLAN ID or VLAN name from the RADIUS server, it moves the authenticator port to the designated Guest VLAN and changes the port to the authorized state.
Transmission Period: Sets the
Quiet Period: Sets the number of seconds that authenticator ports wait after a failed authentication before accepting authentication requests again. The range is 1 to 65535 seconds.
Supplicant Timeout: Sets the
Maximum Request: Specifies the maximum number of times authenticator ports transmit EAP Request packets to clients before timing out authentication sessions. The range is 1 to 10.
Server Timeout: Sets the length of time the switch waits for a response from the authentication server. The range is 1 to 65535 seconds.
7.To permanently save your changes, select Save Configuration to Flash from the main menu on the left side of the page.
