Allied Telesis AT-S111, AT-GS950/48PS manual PoE Configuration

Chapter 22: Power Over Ethernet (PoE)

PoE Configuration

To configure the basic STP and RSTP settings, perform the following procedure:

1.From the main menu on the left side of the page, select Power Over Ethernet Configuration.

The Power Over Ethernet Configuration page is displayed. See Figure 114.

Figure 114. Power Over Ethernet Configuration Page

The Power Over Ethernet Configuration page displays the PoE status and allows you to configure PoE feature with the following parameters:

Port - Indicates the port with a specific PoE status and that you are configuring.

Admin - To activate or deactivate PoE on a specific port, select

Enable or Disable. By default the PoE feature is disabled on all

286