Allied Telesis AT-S111 manual AT-GS950/48PS Default Parameters, Appendix B

Appendix B

AT-GS950/48PS Default Parameters

Table 12 lists the factory default settings for the AT-S111 Management software on the AT-GS950/48PS switch. The Parameters reflect the fields found on each web page.

Table 12. AT-S111 Management Software Default Settings

Parameter	AT-GS950/48PS	Specifications
	Default Setting
	System/Management
System Description	AT-GS950/48PS	-
System Object ID	1.3.6.1.4.207.1.4.167	-
System Name	none	0 - 15 characters
System Location	none	0 - 30 characters
System Contact	none	0 - 30 characters
	System/IP Setup
IP Address	192.168.1.1	IPv4 address in xxx.xxx.xxx.xxx hex format;
		except 127.0.0.1
Subnet Mask	255.255.255.0	IPv4 address in xxx.xxx.xxx.xxx hex format;
		except 127.0.0.1
Default Gateway	0.0.0.0	IPv4 address in xxx.xxx.xxx.xxx hex format;
Address		except 127.0.0.1
DHCP Mode (Client)	Disabled	Enabled/Disabled
	System/IP Access List
IP Restriction Status	Disabled	Enabled/Disabled
IP address	none	IPv4 address in xxx.xxx.xxx.xxx hex format;
		except 127.0.0.1

369