Allied Telesis AT-S111, AT-GS950/48PS manual 328

Chapter 26: Software/Configuration Updates

Figure 127. Firmware Upgrade via TFTP Page

The Image/Version Date shows the current version and date of software installed on the switch.

3. Change the following parameters as necessary:

TFTP Server IP: The IP address of the TFTP server from which you are downloading the new software.

Image File Name: The full name of the AT-S111 file (including the file extension) you are downloading.

Retry Count: The number of times the firmware upgrade is retried.

The range is 1 - 20.

4.To activate your changes on the switch, click Apply.

The software immediately begins to download onto the switch. This process takes a few minutes. After the software download is complete, the switch initializes the software and reboots. You will lose your web browser connection to the switch during the reboot process.

328