AT-GS950/48PS Switch Web Interface User’s Guide
switch ports.
You can select the ALL row to set all of the ports to the same setting.
Status - The PoE port status is given as follows:
Power ON - The port is supplying PoE power.
Power OFF - The port is not supplying PoE power.
Class - The PoE class is indicated the class of the PD. N/A is displayed when the port is not supplying power.
Note
See Table 6 on page 284 for a definition of the PD PoE classes.
Priority - Indicates the port priority: Low, High, or Critical. For more details, see “Port Prioritization” on page 285.
Power(mW) - Indicates the Power in milliwatts that the port is supplying power to the PD.
Voltage(V) - Indicates the Voltage in volts as measured at the port when the port is supplying power to the PD.
Current(mA) - Indicates the Current in milliamps that the port is supplyng to the PD.
2.Once you have configured the parameters, click Apply for the applicable port(s).
3.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
