Allied Telesis AT-S111, AT-GS950/48PS manual SSL Settings

Chapter 2: System Configuration

SSL Settings

The AT-GS950/48PS switch has a web browser server for remote management of the unit with a web browser application from management workstations on your network. By default, the server operates in a non-secure HTTP mode and can be configured to communicate in a secure HTTPS mode with SSL protocol.

In many situations, the communication with the switch will be in a controlled environment and it is acceptable to communicate with the management software in the HTTP mode.

However, you may find that your management communications are subject to outside security risks and web sessions conducted in the non- secure HTTP mode are vulnerable to security issues because the packets are sent in clear text. Web browser management sessions that use the secure HTTPS mode with SSL protocol are protected against snooping because the packets exchanged between the switch and your management workstations are encrypted. When operating in this mode, only the AT-GS950/48PS switch and the web browser are able to decipher the packets sent and received between them.

Configuring SSL To enable or disable the SSL protocol feature, perform the following procedure:

1.From the main menu on the left side of the page, click the System folder.

The System folder expands.

2.From the System folder, select SSL Settings.

The SSL Settings Page is displayed. See Figure 12.

Figure 12. SSL Settings Page

3.From the SSL Settings field, select one of the following choices from the pull-down menu:

Enable - The secure SSL mode is active. You must log in to the switch’s management using the HTTPS mode on your browser.

Disable - The secure SSL mode is inactive. You must log in to the switch’s management using the HTTP mode on your browser.

44