Allied Telesis AT-S111 Configuration, From the Voice Vlan folder, select Voice Vlan Settings

Chapter 20: Voice VLAN

Configuration

Prior to configuring your voice VLAN, you must first configure a tagged

VLAN. This VLAN will be used as a basis for your voice VLAN.

Note

See “Create a Tagged VLAN” on page 157 for more information about configuring a tagged VLAN with Not Member and Static tagged ports.

The procedure described in this section allows you to configure a voice

VLAN on the AT-GS950/48PS switch.

To configure a voice VLAN, perform the following procedure:

1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.

2.From the Bridge folder, select Voice VLAN. The Voice VLAN folder expands.

3.From the Voice VLAN folder, select Voice VLAN Settings.

The AT-GS950/48PS Voice VLAN Setting Page is displayed. See Figure 105 for a partial view of this page.

Figure 105. AT-GS950/48PS Voice VLAN Setting Page

Before entering any configuration parameters, you must enable the voice VLAN to activate the other parameter fields in the Voice Vlan Global Settings section which are greyed out.

262