1. Mounting and

2. Setting the Focus

Detaching the Lens

Mode

See your camera’s instructions for instructions on

 

mounting and detaching the lens.

 

 

m

 

2

 

.

 

13m

 

AF MF

 

To shoot in autofocus (AF) mode, set the focus

• After detaching the lens, place the lens with the

mode switch to AF.

rear end up to prevent the lens surface and

To use only manual focusing (MF), set the focus

electrical contacts from getting scratched.

mode switch to MF, and focus by turning the

• If the contacts get soiled, scratched, or have

focusing ring. The focusing ring always works,

fingerprints on them, corrosion or faulty

regardless of the focus mode.

connections can result. The camera andClensOPY

may not operate properly.

After autofocusing in ONE SHOT AF mode, focus

• If the contacts get soiled or have fingerprints on

manually by pressing the shutter button halfway

them, clean them with a soft cloth.

and turning the focusing ring. (Full-time manual

• If you remove the lens, cover it with the dust

focus)

cap. To attach it properly, align the lens mount

 

index and the K index of the dust cap as shown

 

in the diagram, and turn clockwise. To remove it,

 

reverse the order.

 

ENG-4