3Menu Function SettingsN

During the Live View display, you can still set the menu options. Live View functions are listed below.

Under the [6] tab and [Live View/Movie func. set.] menu, you can set the following functions.

The functions settable in this menu screen only apply during Live View shooting and Movie shooting. These functions do not take effect during viewfinder shooting.

Grid display

With [Grid 1 ] or [Grid 2 ], you can display grid lines. You can check the camera tilt before shooting.

Silent shooting

•Mode 1

The shooting operation noise is quieter than with normal shooting through the viewfinder. When you set the drive mode to <i>, you can shoot continuously at approx. 3 fps.

•Mode 2

When you press the shutter button completely, only one shot will be taken. While you keep holding down the shutter button, the camera operation will be suspended. Then when you return to the shutter button’s halfway position, the camera operation will resume. The shooting noise is thereby minimized. Even if the current drive mode is set to continuous, only a single shot will be taken.

•Disable

If you use a TS-E lens to make vertical shift movements or use an Extension Tube, be sure to set this to [Disable]. Setting it to [Mode 1] or [Mode 2] will result in incorrect or irregular exposures. When you press the shutter button completely, the shutter will sound like it took two shots. However, only one shot will be taken.

113