wPrinting

 

4 Set the printing effects.

 

Set as necessary. If you need not set

 

any printing effects, go to step 5.

 

The screen display may differ

 

depending on the printer.

 

Select the option on the upper right,

 

then press <0>.

 

Select the desired printing effect with

 

the dial, then press <0>.

 

If the <e> icon is displayed next to

 

<z>, you can also adjust the

 

printing effect (p.178).

 

 

Item

Description

EOn

The image will be printed according to the printer’s standard

colors. The image’s Exif data is used to make automatic

 

corrections.

EOff

No automatic correction will be performed.

EVivid

The image will be printed with higher saturation to produce

more vivid blues and greens.

 

ENR

The image noise is reduced before printing.

0B/W

Prints in black-and-white with true blacks.

0Cool tone

Prints in black-and-white with cool, bluish blacks.

0Warm tone

Prints in black-and-white with warm, yellowish blacks.

zNatural

Prints the image in the actual colors and contrast. No

automatic color adjustments will be applied.

 

zNatural M

The printing characteristics are the same as the “Natural”

setting. However, this setting enables finer printing

 

adjustments than with “Natural.”

EDefault

The printing will differ depending on the printer. For details,

see the printer’s instruction manual.

 

*When you change the printing effects, it is reflected in the image displayed on the upper left. Note that the printed image might look slightly different from the displayed image which is only an approximation. This also applies to [Brightness] and [Adjust levels] on page 178.

176