Manuals / Canon / Photography / Camera Flash

Canon 2805B002 manual QManual Flash, Press the D button so that q is displayed

Models: 2805B002

1 38

Download 38 pages 58.5 Kb

Page 19

qManual Flash

You can set the flash output from 1/64 power to 1/1 full power in full- stop increments.

Use a hand-held flash meter to determine the required flash output to obtain a correct flash exposure. Be sure to first set the camera’s shooting mode to <W> or <q>.

1Press the <D> button so that <q> is displayed.

2 Set the flash output. Press the <8> button.

XThe flash output display will blink.

Press the <9> button to set the flash output, then press the <8> button.

Press the shutter button halfway to see the effective flash range displayed.

19

Image 19

Canon 2805B002 manual QManual Flash, Press the D button so that q is displayed

Contents

English Basic operation is the same as with normal AE shooting Thank you for purchasing a Canon productContents Case NomenclatureLCD panel LCD Panel Getting Started and Basic Operation Close the cover Installing BatteriesInstall the batteries Open the coverAttach it to the camera Wireless Selector SettingsAttaching to the Camera Loosen the locking ringCheck that the flash is ready Turn on the Power SwitchSet the power switch to K About Auto Power OffTake the picture Fully Automatic Flash ShootingSet the Speedlite to a Focus the subjectFlash Sync Speeds and Apertures Used Using E-TTL II and E-TTL Autoflash in the Shooting ModesUsing Flash FFlash Exposure Compensation UsingPress the 8 button Focus the subject Press the 7 button 7FE LockPress the E button so that r is displayed CHigh-Speed SyncRSecond-Curtain Sync Press the E button so that c is displayedSet the Bounce Direction Bounce FlashPress the G button Using the Wide PanelPress the D button so that q is displayed QManual FlashChanging Meters or Feet CSetting Custom FunctionsSetting Description Custom Function SettingsReverting to 430EX Default Settings About Color Temperature Information TransmissionAbout the AF-Assist Beam Wireless Flash Wireless Flash Check the flash operation Set the master unit’s flash mode to aSet the camera and shoot Page Press the G button so that w blinks Set the channel No Using Fully Automatic Wireless FlashSetting Communication Channel Flash exposure compensationAbout Slave Group Control Setting the Slave IDSetting Manual Flash with the Slave Unit 430EX System ReferenceElectrical contacts of the Speedlite and camera are dirty TroubleshootingSpeedlite’s internal batteries are exhausted Attach the Speedlite securely to the cameraYou used high-speed sync Subject has a very dark or light colorType SpecificationsAF-Assist Beam Manual Flash Guide No. GNo. ISO 100, in meters/feetFeatures not Available with Some Type-B Cameras Using a Type-B CameraFeatures Available with All Type-B Cameras Features not Available with Any Type-B CamerasPage