Canon 2807B006 Changing Image Playback Settings

Changing Image Playback Settings

3Adjusting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to read.

1 2

Select [LCD brightness].

Under the [6] tab, select [LCD brightness], then press <0>.

Adjust the brightness.

While referring to the gray chart, turn the <5> dial, then press <0>. You can also display the [LCD brightness] screen with the <B> button.

To check the image’s exposure, you should look at the histogram (p.134).

3Setting the Image Review Time

You can set how long the image is displayed on the LCD monitor immediately after capture. To keep the image displayed, set [Hold]. To not have the image displayed, set [Off].

1 Select [Review time].

Under the [1] tab, select [Review time], then press <0>.

2Set the desired time.

Turn the <5> dial to select the setting, then press <0>.

If [Hold] is set, the image will be displayed until the auto power off time elapses.

145