3 Install the Print Head
•Do not handle the Print Head roughly such as applying them excessive pressure or dropping them.
1 | (D) |
(B) |
(A) 
(C)
Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B) until it locks into place.
The Scanning Unit (Cover) (B) is fixed automatically. The Print Head Holder (C) comes out. (This is where you install the Print Head.)
•Close the Document Cover (D) and lift it with the Scanning Unit (Cover).
•The Print Head Holder makes a noise as it moves. This is normal operation.
2
(E)
Raise the Print Head Lock Lever (E).
•Firmly raise the Print Head Lock Lever until it stops. (The Print Head Lock Lever may feel heavy.)
•If the Print Head Holder does not move, make sure that the machine is turned on.