3 Install the Ink Tank | 4 | 5 |
Press the PUSH mark on the ink tank until it clicks into place.
Make sure the Ink lamp lights red.
•Be sure to install it in a
•Match the labels when installing.
Install all the other ink tanks in the same way.
Install all the ink tanks.
•Once you have installed the ink tanks, do not remove them unnecessarily.
•Make sure all the Ink lamp lights red.
(B)
Close the Scanning Unit (Cover) (B).
•Wait until the screen above appears (about 4 minutes) and go to the next step.
•The machine may make some operating noises when preparing to print. This is normal operation.
•If an error message is displayed on the LCD, make sure that the Print Head and the ink tanks are correctly installed.