Align the Print Head

12

Align the Print Head for better print results. This takes about 5 minutes.

Use a sheet of supplied specialty paper (Matte Photo Paper MP-101) for alignment.

A

B

Load a sheet of supplied specialty paper (Matte Photo Paper MP-101) in the Rear Tray (A) by referring to steps to in "Loading Paper" on page 49.

•Be sure to use MP-101for Automatic Print Head Alignment.

•MP-101cannot be fed from the Cassette. Load it in the Rear Tray.

•MP-101has front and back sides. Load it so that the cut corner (B) is at the top right.

C

Confirm the message on the LCD and press the OK button.

Extend the Output Tray Extension (C).

•Print Head Alignment takes about 5 minutes to complete.

Wait until the pattern is printed, then go to the next step.

•For details on media sizes and types you can use, refer to "Loading Paper" in the on-screen manual: Basic Guide.

Hardware Setup 11