Install the Ink Tanks
5
6 7
D
E
Install all the other ink tanks in the same way.
Install all the ink tanks.
Make sure all the Ink lamps light red.
Make sure that the Inner Cover (D) is closed by touching it with your hand.
Close the Scanning Unit (Cover) (E).
•Wait until the LCD changes as shown in the illustration (about 5 minutes) and go to the next step.
•The machine may make some operating noises when preparing to print. This is normal operation.
•Once you have installed the ink tanks, do not remove them unnecessarily.
•If an error message is displayed on the LCD, make sure that the Print Head and the ink tanks are correctly installed.
10Hardware Setup