Install the Ink Tanks
•Handle the ink tanks carefully. Do not drop or apply excessive pressure to them.
•If the Scanning Unit (Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. In this case, close and reopen the Scanning Unit (Cover).
•Be sure to use the supplied ink tanks.
1
1
2
Pull the orange tape (1) in the direction of the arrow to peel off the protective film and remove the film (2) completely.
2
A
C
B
While pressing down with your left thumb, twist off the orange protective cap (A) located on the bottom of the ink tank.
•Do not touch the electrical contacts (B) or open ink port (C) on the ink tank. The machine may not print properly if you touch them.
•Do not push the sides of the ink tank; ink may splash.
Hardware Setup